LD6 Integrated Mobile Unity

The LD6 is a comprehensive and powerful integrated single mobile unit that can be configured to accommodate a range of VERIPOS solutions.

As a fully integrated mobile unit, the LD6 can receive VERIPOS services through the L-band demodulator. The LD6 can be configured with single or dual frequency GNSS receivers, as well as optional reception modules, to receive corrections from VERIPOS HF service, MF beacon service and UHF correction sources. All information is available for output to external equipment and software for processing.

The LD6 is suitable for a wide range of applications including hydrographic / offshore surveying, dredging, offshore construction, seismic exploration and dynamic positioning.

The modular design increases flexibility and simplifies the integration of new OEM hardware, allowing the LD6 to be upgraded offshore.

A colour touch-screen interface makes set-up quick and easy, from configuration through to monitoring. The LD6 can track all signals from the GPS and GLONASS satellite constellations. It can also receive augmentation data using the latest generation VERIPOS L-band hardware.

A powerful onboard processor has the ability to run VERIPOS positioning algorithms and applications. A monitor can be attached to the LD6 for a more detailed graphical display of positioning QC. A solid-state hard disk provides raw data storage for post processing and support. Fourteen galvanic isolated serial ports can be configured for either EIA232 or EIA422 output. Data is also available through dual independent ethernet ports to allow operation on a LAN.

Category:

Description

Specification

Physical characteristics

Receiver size: 2U rack mountable x 46cm depth
Weight: less than 10kg
Display: 8.89cm colour VGA touch-screen LCD display
Operating temp: -15 to +55 degrees Celsius*
Storage temp: -20 to +70 degrees Celsius
Input voltage: 100v to 240v AC or 12v to 24v DC
Power consumption: less than 65W

Onboard ETX Express PC
1.6 GHz ATOM processor
1GB SDRAM, upgradeable to 2GB
32GB solid-state hard drive
Windows Embedded XP operating system

Data ports and interfaces
6 USB Ports – Type-A connector (USB 2.0)
Dual independent Ethernet ports
14 EIA 232 / 422 galvanic isolated ports
with RJ45 Connection
VGA monitor port for external monitor
Audio line output (max 17.5dBu)
1PPS and Event marker
(GNSS card must be installed)

VERIPOS L-band demodulator
Frequency input 1525 to 1559 MHz input
Data rates 600, 1200, 2400 and 4800 baud

Regulatory and Environmental
CE Marking Directive 93/68/EEC
FCC Part 15 [14] Class B
Marine Equipment Directive,
EN60945:2002 (Protected Equipment)
EU RoHS Directive 2002/95/EC
EU WEEE Directive 2002/96/EC

Optional cards
GNSS receivers supported:
Septentrio AsteRx2 family

Minimum 70 channel
L1 GPS C/A code
L1 / L2 / L2C Carrier Phase
GLONASS L1 / L2 Carrier Phase
SBAS

Hemisphere SBX-4 MF receiver
Dual channel receiver for reception
of MF Beacon services (e.g. IALA)

UHF receiver
Pacific Crest UHF receiver
Frequency 390 to 430 MHz and
430 to 470 MHz options available

tensosys-jrc-award